home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Tech Arsenal 1
/
Tech Arsenal (Arsenal Computer).ISO
/
tek-06
/
nwl200.zip
/
200.ASC
next >
Wrap
Text File
|
1991-10-29
|
5KB
|
103 lines
FYI
Note: The origin of this information may be internal or external
to Novell. Novell makes every effort within its means to verirfy
this information. However, the information provided in this
document is FOR YOUR INFORMATION only. Novell makes no explicit
or implied claims to the validity of this information.
TITLE: Installing WordPerfect 5.x
DOCUMENT ID#: FYI.P.6008
DATE: October 29, 1991
PRODUCT: NetWare Lite
PRODUCT VERSION: All versions
SUPERSEDES: NA
SYMPTOM: NA
ISSUE/PROBLEM
Installing WordPerfect 5.x
This document was created to help you run WordPerfect on a
NetWare Lite server. If you want more than one user to have
access to the WordPerfect program, you must make these changes.
WARNING: If you plan on using WordPerfect on two or more
machines, you must obtain a multiple-copy site license from the
WordPerfect Corporation.
FASTPATH STEPS DETAILED INSTRUTIONS
1. cd c:\wp 1. It is necessary to be in the
directory where the WordPerfect files
are located. This is usually called
c:\wp. To change to this directory type
"cd \wp" and press enter.
2. Type "install" 2. WordPerfect has an installation
procedure which allows you to change the
machine's configuration. To access the
installation menu, type "install" and
press enter.
3. Select "Y" to 3. Select "Y" to continue with the
continue installation procedure.
4. Select "Y" to 4. Since you are installing these files
install to hard disk for a NetWare Lite server, select "Y" to
install to your hard disk drive.
Note: You must have a hard drive to
install your computer as a server with
NetWare Lite.
5. At the installation 5. Select "3" to perform a customized
menu, select "3" installation onto a network.
6. At the Network 6. The WP{WP}.ENV file is the file that
Customization Installation lets WordPerfect recognize a network
Menu, select "5" environment and allows the WordPerfect
program files to be shared by multiple
users. To check or create this file,
select "5".
7. Press "Y" to create if 7. If the WP{WP}.ENV file does not
necessary already exist, the computer will ask you
if you want to create it. Select "Y"
for yes. Note: If this file already exists,
the computer will skip this step.
8. At the Check 8. The Check WP{WP}.ENV File menu
WP{WP}.ENV File Menu, appears and allows you to select the
select "0" type of network environment you will be
using. Since NetWare Lite is not
listed, select "0" for other.
Note: Do NOT select 1 for Novell
Netware. This will not configure your
machine for NetWare Lite.
9. Enter the directory 9. At the bottom of the screen, the
and path for setup computer will ask you for the path you
want the setup files to be copied to.
Normally you would set this path to the
same location of the other WordPerfect
files. If that is correct, type in that
path and press enter. If not, change it
to reflect the desired path.
10. Pres F7 to exit 10. Installation is now comlete. Press
installation the F7 function key to exit the
installation menu.
From now on, when you start WordPerfect, the program will prompt
you to enter a three letter username. This is to distinguish one
user from another. Each user must go into the setup (shift-F1)
and define the location of their own files. Each user must
specify the drive letter they mapped WordPerfect to in NetWare
Lite for the location of the system files.
Note: When printing documents from WordPerfect, make sure you
load NetWare Lite before you load WordPerfect. And if your
computer is installed as both a client and a server, make sure
your startnet.bat file loads client before server (this is the
default).